Filter by material, process or property. Photos show the material family as it arrives from the shop.
| Material | Process | Properties | Typical use | Finishes |
|---|---|---|---|---|
| Aluminum 6061-T6 | CNC, sheet metal | 310 MPa, good machinability, weldable | housings, brackets, fixtures | anodize, bead blast, powder coat |
| Aluminum 7075-T6 | CNC | 570 MPa, high strength, poor weldability | aerospace fittings, loaded parts | anodize, chromate |
| Aluminum A380 | Die casting | 320 MPa, good fluidity | housings at volume | as cast, powder coat, e-coat |
| Steel 1018 | CNC, sheet metal | 440 MPa, low carbon, weldable | brackets, shafts, weldments | zinc plate, black oxide, powder coat |
| Steel 4140 | CNC, forging | 655 MPa annealed, heat treatable | shafts, gears, tooling | black oxide, nitride, ground |
| Stainless 304 | CNC, sheet metal | 505 MPa, corrosion resistant | enclosures, food and medical | passivate, brushed, electropolish |
| Stainless 316 | CNC, sheet metal, casting | 515 MPa, marine and chemical | manifolds, marine parts | passivate, electropolish |
| Stainless 17-4 PH | CNC | 1,100 MPa H900, precipitation hardened | instrument parts, aerospace | passivate |
| Titanium Gr 5 | CNC, DMLS | 950 MPa, light, biocompatible | aerospace, implants, fixtures | as machined, anodize type III |
| Copper C110 | CNC, stamping | 390 MS/m conductivity | busbars, cold plates | tin plate, nickel plate |
| Brass C360 | CNC, Swiss | free machining | fittings, inserts | as machined, nickel plate |
| ABS | Molding, FDM | 40 MPa, tough, paintable | enclosures, housings | SPI finishes, paint, texture |
| PC | Molding, FDM | 65 MPa, impact resistant, clear grades | lenses, guards | polish, texture |
| Nylon PA12 | SLS, MJF | 48 MPa, durable, flexible thin | brackets, ducts, housings | dye, vapor smooth |
| PEEK | CNC, molding | 100 MPa, 250 °C continuous | bushings, semiconductor parts | as machined |
| Delrin (POM) | CNC, molding | 70 MPa, low friction | gears, bushings, guides | as machined |
by 